Hayward Gordon ChopX Chopper Pump
Chop-X Series Chopper Pumps perform the dual function of cutting and pumping, making them ideally suited for applications requiring reduction of solids size and/or protection of downstream equipment.
PRINCIPLE OF OPERATION
Hayward Gordon’s ChopX Chopper Pumps design is an open-type impeller with sharpened leading and vane edges. The primary chopping and conditioning action of solids within the fluid is provided by the impeller’s leading edges rotating in tight clearance across the cutter bar at the pump suction. A secondary cutting and expulsion action takes place behind the impeller with the impeller’s sharpened vane edges, which rotate across spiral grooves on the backplate. This secondary cutting action both cuts and expels solids from behind the impeller.
PUMP CONFIGURATIONS
*Horizontal Dry Pit *Vertical Dry Pit
*Closed Coupled *Submersible
*Immersible *Vertical Bering
Vertical Cantilever Pumps
Hayward Gordon’s vertical Chopper design cantilever pumps offer the advantages of exceptionally low maintenance and robust operation on the most demanding services.
The cantilever design completely eliminates the need for submerged bearings, seals, or check valves and the maintenance and problems associated with these additional components.
This design also allows the pump to run dry without damage and is self-priming once the liquid level is above the volute.
C Series
Tsurumi C Series Cutter Pump™ (Chopper Design) is solids handling non-clog submersible pump with a unique tungsten carbide tipped single or multi-vane impeller and high chrome serrated wear plate for shredding of solids. Municipal, industrial and commercial applications. 1 to 30HP, Single phase and three phase available.