Eliminator
AMERICAN MADE BY AMERICAN CRAFTSMAN
The GPM-Eliminator™ is the world’s toughest, most reliable slurry pump built to handle the most abusive applications. From dirty water to 70% solids, our submersible pumps are engineered to provide years of trouble-free service. All GPM-Eliminator pumps offer:
SIZED TO FIT
GPM-Eliminators range in size from 5HP up to 800HP with discharges from 2″ to 8″.
MATERIALS THAT LAST
To GPM-Eliminators use 28% high chrome iron liquid end as standard for extended wear and durability, with optional materials such as CD4MCu and 316SS.
MECHANICAL SEALS
Simple is a sound and important part of keeping our motors dry.
CLASS H INSULATED MOTORS
If run-dry conditions occur, the Class H insulation in GPM’s submersible motors allow us to run longer.
OVERSIZED PUMP SHAFTS
Minimizes shaft deflection and increases mechanical seal life.
CASING AGITATION SPRAY HOLES
Keeps the sump contents in suspension allowing them to clean the sump.
Hermetic Sealless Submersible Pumps
TCN
Chemical | Oil & Gas | Power Generation
* Single-stage
* Normal-suction design
* Explosion protection according to Directive
2014/34/EU
TCAM
Chemical | Oil & Gas | Power Generation
* Multistage
* Normal-suction design
* Explosion protection according to Directive
2014/34/EU
NTE
Submersible Trash Pump, Portable Dewatering, Pumps with Mechanical Seal and Oil Filled Motor.
Material: Cast Iron
Fluid Temperature (°F)
Up to: 104
Flow (GPM) Up to: 65
Head (FT) Up to: 59
Suction (In) Up to: NA
Discharge (In) Up to: 3
Power (HP) Up to: 1
Solids Handling (In) Diameter Up to: 0.25
NNE
Submersible Trash Pump, Portable Dewatering, Pumps with Mechanical Seal and Oil Filled Motor.
Material: Plastic
Fluid Temperature (°F)
Up to: 104
Flow (GPM) Up to: 45
Head (FT) Up to: 27
Suction (In) Up to: NA
Discharge (In) Up to: 1.25
Power (HP) Up to: 1
Solids Handling (In) Diameter Up to: 0.2
NSE
Submersible Trash Pump, Portable Dewatering, Pumps with Mechanical Seal and Oil Filled Motor.
Material: Stainless Steel / Plastic
Fluid Temperature (°F)
Up to: 104
Flow (GPM) Up to: 30
Head (FT) Up to: 150
Suction (In) Up to: NA
Discharge (In) Up to: 1
Power (HP) Up to: 1.3
Solids Handling (In) Diameter Up to: 0.02
LH Series
Tsurumi’s LH Series handles medium to high flows at higher heads, yet its top discharge flow-through design welcomes low water level operation for extended periods. Complete with a high chromium semi-open impeller and adjustable wear rings, our LH pumps provide you with increased wear resistance whether your application is effluent transfer, construction site drainage, or commercial/industrial dewatering.
LHW Series
Tsurumi’s LHW series achieves extremely high head capabilities. Our dual staged enclosed impellers are just one of many features found engineered into these durable pumps which can help you solve all your long distance water transfer needs.
LH LHW SS Series
LH / LHW Stainless Steel Series is a submersible stainless steel casting high head, corrosion-resistant pump designed handling aggressive and corrosive liquids. All wetted parts are made of 316 stainless steel, enables it to withstand demanding conditions found in construction and mining applications. LH-14 features single impeller with 316 stainless steel casting / LHW-14 features dual impellers with 316 stainless steel casting.
Tsurumi’s LH Series handles medium to high flows at higher heads, yet its top discharge flow-through design welcomes low water level operation for extended periods. Complete with a high chromium semi-open impeller and adjustable wear rings, our LH pumps provide you with increased wear resistance whether your application is effluent transfer, construction site drainage, or commercial/industrial dewatering.
SMF
end users.
Operation limits
VTP-Sub
Operation limits
Maximum Pressure up to 74 bar (1,080 psi)
Applications Residential and municipal water supplies, agricultural irrigation, offshore platforms, deep well and mine dewatering, large construction sites, fire protection.